Supercharged 100 Hz GPS / CAN Logger
100Hz Receiver at full Throttle - GPS meets multi CAN-Logging
The all-new generation of xproGPS_max2 is based on the latest GPS technology,
offering reduced signal noise, enhanced precision and an outstanding
RTK accuracy of up to 0.01 meters as well as an optional Heading
and pitch angle feature.
xproGPS_max2 is positioned as a extremely compact and comfortable Test System
for all kinds of automotive applications.
xProGPS_max2 includes several interfaces and I/Os such as 4 independent
CAN busses, Analog Inputs, Counters plus an extension socket for future add-ons.
In addition xProGPS_max2 provides several internal sensors such a 6D-Inertial
Unit and a precision Altimeter.
The build quality and use of high-quality components ensure a long product life
thus reducing total costs of ownership.
modular Hardware powered by SUCHY
©
Software
xproGPS_max2 - not just another datalogger
Vehicle testing has become extremely complex. Simply logging solely
GPS information alone no longer meets current demands.
Instead it is necessary to access information from all kinds of external sensors and
communication systems.
The brandnew xproGPS_max2 with its Top-of-Class GPS sub-system is equipped with
4 independend CAN busses - each of which can log up to 100 individual channels at a
data rate of 100 Hz.
4 Analog Voltages can be measured without any additional external hardware.
The necessary interface is already on-board. Resolution is 24-Bits over an extra wide
input range of +/-20 Volts.
We have also included 4 counter inputs i.e. for slip measurements. Also available are
an Analog Output channel with 16-Bit resolution, a programmable Frequency
Output, a programmable electronic Switch, a sophisticated hardware trigger etc.
Included as well are internal sensors: a quality 6D-Inertial sensor with accelerometer
and gyro. Even a precision Altimeter is already built in.
Attach one of our driver displays to modify local settings or to follow incoming data
in Real-Time. Log data straight on a laptop by using the USB-C channel.
you define the Targets - xproGPS_max2 will do the Job
A powerful Software package supports application modules for various
vehicle dynamics procedures such as Standing Start, Flexibility, Brake Test etc.
xpro GPS_max2 can acquire 100 channels on each of the 4 CAN busses which
results in a total of 400 channels.
Analog Inputs, Counters, several software controlled Outputs complete a flexible
access to the real world.
Real-Time data can be transferred to a Laptop or to a compact Driver Display via
USB.
Dozens of different diagrams and spreadsheets allow a rapid evaluation of all
test data.
With just by the press of a button data will be exported to MS Excel, Google Earth or
OpenStreetMap OSM.
extend physical Channels with xpro Signal Conditioning Modules
Convincing performance for all standard driving modes and as a data logger
measuring at full Throttle -
xpro 100 Hz GPS / CAN Logger !
a truly modular Hardware
You define the targets -
now with precision RTK
xproGPS_max2 will do the Job
- powered by SUCHY
©
Software
xproGPS_max2 is positioned as an compact
and comprehensive test system for a wide range of
test applications in automotive development.
The newly introduced generation of xproGPS_max2
is based on the latest GPS technology with low
signal noise, higher precision, and outstanding
RTK accuracy of up to 1 cm.
A dual-antenna version with output of heading
and inclination angle is available as an option.
extended Logging Capabilities:
4 CAN Interfaces plus more I/Os
xProGPS_max2 includes several interfaces and I/O
ports, among others 4 independent CAN buses,
4 analog inputs, 4 counters plus a socket for future
expansions.
In additon xProGPS_max2 comes with several
internal sensors - a 6D inertial unit and a precision
altimeter.
The high-quality workmanship and use of quality
only components ensure a long service life and
reduce the total cost of ownership.
A powerful Software package supports application
modules for various vehicle dynamics procedures
such as Standing Start, Flexibility, Brake Test etc.
xpro GPS_max2 can acquire 100 channels on each
of the 4 CAN busses which results in a total of 400
channels.
Analog Inputs, Counters and several software
controlled Outputs complete a flexible access to the
real world.
Real-Time data can be transferred to a Laptop or to
a compact Driver Display via USB.
Dozens of different diagrams and spreadsheets
allow a rapid evaluation of all test data.
With just by the press of a button data can be
exported to MS Excel, Google Earth or
OpenStreetMap OSM.
xproGPS_max2 - not just another datalogger
Vehicle testing today has become extremely
complex. Logging solely GPS information alone no
longer meets current demands for performance
tests.
Instead it is necessary to access information from all
kinds of external sensors and communication
systems.
The brandnew xproGPS_max2 with its Top-of-Class
GPS sub-system is equipped with 4 independend
CAN busses - each of which can log up to 100
individual channels at a data rate of 100 Hz.
4 Analog Voltages can be measured without any
additional external hardware - the necessary
interface is already on-board. Resolution is 24-Bits
over an extra wide input range of +/-20 Volts.
We have also included 4 counter inputs i.e. for slip
measurements. Also available are an Analog Output
channel with 16-Bit resolution, a programmable
Frequency Output, a programmable electronic
Switch, a sophisticated hardware trigger and more.
Included as well are internal sensors: a quality 6D-
Inertial sensor with accelerometer plus a gyro. Even
a precision Altimeter is already built in.
Attach one of our driver displays to modify local
settings or to follow incoming data in Real-Time.
Log data straight on a laptop by using the USB-C
channel.
use xpro Thermo / Analog to add Channels
Expand xpro GPS_max2 with SUCHY signal
converters for thermocouples, analog voltages or
use the external high-quality inertial sensor
xpro INS IP68, which can also be used to acquire
dynamic angles.
Automotive Test Equipment
